Fermacell manufactures a wide range of gypsum and cement based boards for internal - walls, ceilings and floors, as well as boards for extenal applications such as rainscreen and render carrier boards.
Fermacell products are available in standard sizes as well as handy and custom formats. Wallboard thickness ranges from 10 mm to 18 mm and our dry flooring range from 20mm to 50mm.
Fermacell products are third party accredited by BBA, ETA, IBR and The Eco insititute and also carry the CE mark. You can download all technical certificates here.
You can see our full range of products by downloading our Product Selector
fermacell Gypsum Fibreboards Square
Standard size boards in thicknesses from 10 mm to 18 mm are available. Special sizes to eliminate waste and reduce jointing are available to order.
fermacell Gypsum Fibreboard Tapered Edge ( TE)
Tapered edge boards are available with 2 or 4 sided tapered edges for conventional dry lining installation techniques.
fermacell Powerpanel H2O boards
fermacell Powerpanel H20 is a cement bonded light-concrete board with a laminated structure, reinforced both sides with an alkali-resistance glass fibre mesh. H2O is a water resistant board for wet areas and is has been approved for external use as a render carrier board. External Wall Solutions
fermacell HD boards
fermacell Powerpanel HD Board is a cement bonded glass fibre board reinforced with an aggregate of aerated clay and recycled foamed glass granules. HD Boards are especially practical because they are light-weight and easy to use with a high strength. The water repellent properties of the boards prevents moisture ingress whilst allowing vapour to be retained. HD Boards can be used in semi and fully exposed applications, and as a render carrier board.
fermacell Gypsum Fibre Boards for VENTED AND INSULATED RAINSCREEN Applications
fermacell Gypsum Fibreboard 12.5mm has been tested independently for use as a sheathing board in vented and insulated rainscreen applications. Testing has shown it to be weather resistant, and that it does not degrade with permanent exposure. Discolouration may occur due to moisture absorption in the board surface. A surface treatment or other protection is recommended for prolonged exposure prior to the installation of the cladding system. Test in accordance with CWCT Standard Test Methods at a UKAS accredited facility. External Wall Solutions
fermacell Flooring Systems
fermacell Flooring Systems are a dry alternative to conventional wet screed systems and are designed for upgrading both impact and airborne sound insulation in floors, or for increasing thermal performance. 2E22 fermacell flooring elements are also particularly suitable for use with warm water underfloor heating systems and can be used for upgrading the fire protection to the upper surface of a floor construction.
A full range of accessories is available including fermacell Screws, fermacell Jointstik, fermacell Joint Filler and fermacell Fine Surface Treatment ensuring perfect results whatever the applications.